How to Choose the Right Baby Bath Temperature for Your Child
What is a safe bath temperature for a baby? My favourite parent advice for getting your baby’s bath to the perfect temperature – and keeping it there!
Bath time is a wonderful time to bond with your child!
Splashing around in the water is a lot of fun for your child, but bath time also necessitates some serious health and safety preparation. In addition to the bubbles, toys, and other fun activities (like DIY soap dough and bath paint), bath time necessitates some significant health and safety planning.
What is the first and most important bathing guideline for newborns and young children? Never leave your child alone in the bathtub. Bathrooms are dangerous places for children, and even a little gap in concentration can result in disaster.
Aside from continual observation, you’ll want to make sure you’re not giving an infant a bath that’s too hot (or too cold).
I’ve said it before and I’ll say it again: getting the temperature of your baby’s bathwater just perfect is a little like Goldilocks and the Three Bears. Because your baby’s skin is delicate and prone to eczema and itching, the objective is to choose water that is neither too hot nor too cold.
Which may cause you to ask, what really is “just right” when it comes to water temperature for a baby bath?
(This post contains affiliate links. Our full disclosure policy is really boring, but you can find it here)
What Temperature Should Baby Bath Water be?
The optimal temperature for infant bath water is about 100 degrees Fahrenheit (38 degrees Celsius), with a range of 95 to 102 degrees Fahrenheit for older toddlers. Before washing your infant, check the temperature of the bathwater using a bath thermometer, a spout cover with a thermometer, or your elbow. It should feel warm rather than heated.
Limit how hot your tap water may become by setting your water heater temperature below 120°F (49°C) to enhance safety and prevent scorching.
Tips to Create the Perfect Baby Bath Temperature
Now that you know the ideal bath water temperature, I’d like to share some of my personal bath-time ideas and techniques with you!
I hope it assists you in consistently getting a warm enough bath water temperature so you can focus on having splish-splash fun with your young one!
Make It Fun
For your children, bathtime may be a relaxing experience. Bathing most newborns is a soothing experience for them since the warm water reminds them of their origins in the womb.
However, in order to guarantee that the bath is as flawless as possible, you must ensure that the temperature is exactly correct. Remember Goldilocks, as I mentioned earlier. Not too hot, since this might cause catastrophic burns to your baby’s sensitive skin (or, less dramatically, just make them uncomfortable), and not too cold, as this can shock and disturb your child.
How To Run A Baby Bath
First and foremost, run the water and ensure that the water temperature is appropriate before placing your kid in their baby bathtub.
I let the water run for approximately 30 seconds with the drain open and the tap set to lukewarm to chilly water to get the ideal bath temperature. I close the drain, let the bath fill, then check the temperature with our baby bath thermometer to be sure I’ve got it correct.
Another option is to start with a chilly bath and then add hot water to bring the temperature up to the desired level. If your hot water temperature isn’t limited to less than 120°F (49°C), this is an excellent technique. You may help chill any scorching hot water that flows through your pipes from your boiler system by first adding cold water, which can reach scalding temperatures of up to 140°F (60°C)!
If you choose this option (beginning with chilly water and gradually increasing the temperature), you must properly swirl the bathwater before placing your infant in the tub. There may be areas where hot and cold water hasn’t mingled, resulting in unpleasant “hot spots.”
The optimal bath temperature for a newborn is approximately 100 degrees Fahrenheit (38 degrees Celsius), which is comparable to body temperature.
For a newborn baby’s thinner, more sensitive skin, a somewhat lower temperature (96.8°F or 36°C) may be more pleasant. However, you should ensure that the room is warm and inviting.
If you’re giving your child an oatmeal bath for a rash or itchy skin, use cold water instead of hot, since hot water might exacerbate skin issues even more.
How Much Water Should I Put in the tub?
When washing a newborn, the water should only be a few inches deep.
Around 2-3 inches (5-7cm) is fine for newborns and babies up to about 6 months old. Throughout the bath, make sure to keep one hand on your infant and never let your gaze wander. If you’re worried about submerging your baby in the water, sponge baths or bath support are also good options. Make sure the room is warm enough for this technique.
Fill the bath no deeper than hip height when seated for older children. To minimize slips and falls, keep bath time play to a seated posture (never standing!) and place a non-slip mat on the tub’s base.
How do I Know if my Baby’s Bath is Too Hot?
A bath temperature thermometer is a best and most reliable way to monitor the temperature of your baby’s bathwater. This is what we use, and I like how it tells me whether the bath is too hot or too cold, which is very useful when adding hot or cold water for refills during long, play-filled toddler baths.
You may also measure the temperature of the water without using any devices by dipping your elbow into it. This safety advice may seem strange at first – to dip your elbow rather than your hand – but elbow skin has a different heat sensitivity than the rest of your body, and it feels the most like hot water would feel on your baby’s skin.
Tips to Ensure Water Temperature is Safe for Your Child’s Bath
Check Your Water Boiler Temperature
Most contemporary water heaters/boilers may be programmed to ensure that the hot water that flows from the boiler to your faucets is never excessively hot.
The water that comes out of your home’s hot taps may reach temperatures of up to 140°F (60°C) if it is unrestricted.
Consider setting your boiler to lower the maximum hot water temperature accessible from your taps as an extra safety step if you have small children at home.
When you’re trying to set a baby’s bath temperature exactly right, this technique will come in handy, but it will also come in handy if you have an inquisitive toddler who can turn the taps on and off on their own.
Spout Covers for Added Safety
Not only is the water very hot, but the taps that provide it may also heat up in an instant. While this may not be a concern for little children, as they grow older and more interested, they may want to play with the faucets and taps on their own.
It’s crucial to keep your infant away from the gleaming and enticing taps since they might get burned if they touch them. Even after the water has passed through, this might happen.
Tap coverings are also available to assist avoid burns in this manner. Most faucet covers also provide protection against head impacts.
Ensure Roo Is Warm
In addition to ensuring that the bath temperature is ideal, you should also ensure that the bathroom (or the area in which you bathe your child) is warm. The temperature difference between the room’s cooler air and the bath’s warmer water might be uncomfortable for your child. If the difference is too great, your infant may grow upset.
Give Cuddles Immediately After
Your infant immediately cools off as he or she is removed from the hot water. To keep them from cooling down too much, cover them in a soft, hooded towel and wipe them dry fast. If you’re going to use lotion, do so immediately. Once bath time is done, put on a clean diaper and warm PJs or clothing.
Frequently Asked Questions about Baby Baths
Before you even consider putting your baby in the water, be sure you have everything you’ll need for bath time.
This includes obvious items like shampoo, baby soap, sponges, and a washcloth, as well as any bath toys you might wish to use. You’ll also need a few soft fresh towels (I have a towel placed under my knees to make it more comfortable for me, but bath kneelers work as well!)
If you’re anticipating a call, I’d suggest sending it to voice mail right now. Calls may be distracting, which isn’t always a good thing. And, once your kid is in the water, you should never leave them alone in the water.
Between bathing, I prefer to clean and air dry all of my baby bath toys before storing them inside the real baby bathtub. This ensures that I am prepared for bath time without having to look for anything. Apart from what’s in the baby tub, all I need is my child and a pair of nice, fresh towels!
Perfect Temperature for Bathing your Baby
Remember that the temperature of the bathwater for a baby bath should be approximately 100 degrees Fahrenheit, neither too cold nor too hot.
Check the temperature of the water using a bath thermometer or with your elbow to see whether it feels warm (not hot or cool).
I hope you found this post helpful and that it will assist you in finding the ideal bath temperature for your infant the next time you bathe him or her.
Please feel free to share this post with other parents and families you may know who has a new baby and will benefit from this bathing health information!